V-belt Optibelt SPB 3000 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3000 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3000 RP and any equivalents.
This is an Optibelt SPB 3000 RP narrow wedge V-belt from the Red Power 3 S=C Plus series. The two figures that matter most when you are selecting a replacement are the profile and the length: SPB and 3000 mm. Everything else on this page follows from those two values.
The SPB profile is a narrow wedge section with a 16.3 mm top width, a 13 mm height and a 40 degree angle. Because it is a wedge belt rather than a classic V-belt, it transmits its load through the flanks of the section, so the sheave groove has to match the SPB profile. Check the groove section on the drive before you order, not just the belt that came off it.
Length is stated as 3000 mm. On a wedge belt this is the datum length the drive was designed around, so a belt of a different length will not restore the original tension or speed ratio. If the old belt marking is worn, the profile and length are the two values to read off it first, and the part number on the back is the quickest way to confirm both.
Dimensions
- Section
- SPB
- Length
- 3000mm
Frequently asked questions
- What do the SPB and 3000 mm tell me about this belt?
- SPB is the narrow wedge profile, with a 16.3 mm top width, 13 mm height and 40 degree angle. 3000 mm is the belt length. Together they define the sheave section and the drive geometry the belt fits.
- How do I confirm this is the right replacement?
- Read the marking on the back of the belt you are replacing. If it shows SPB and 3000 mm, this is the matching size. If the marking is unreadable, measure the top width and the outside length and send those with a photo.
- What should I send to get a quote?
- Send the part number SPB 3000 RP, or the profile and length if you are working from an old belt. Our team replies by WhatsApp or email and can confirm the profile and length before you commit.