V-belt Optibelt SPB 3070
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3070 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3070 and any equivalents.
This Optibelt SPB 3070 belt is a narrow wedge V-belt in the SK S=C Plus series. It has a profile of SPB and a length of 3070 mm. When replacing a belt, matching the profile and length to the old belt is the first step.
To match this belt to the one being replaced, read the marking on the back of the old belt. Look for the profile (SPB) and the length (3070 mm). The top width is 16.3 mm, the height is 13 mm, and the angle is 40°. These dimensions help confirm the belt will sit correctly in the pulley groove.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 3070 mm. Also check the pulley groove width to confirm it suits an SPB profile. The SK S=C Plus series is a narrow wedge construction, which is common in industrial drives where space is limited.
When ordering, send the part number SPB 3070 and the quantity needed. If you are replacing multiple belts on the same drive, it is good practice to replace them as a set. Our team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- SPB
- Length
- 3070mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for the profile and length. This belt is SPB profile with a length of 3070 mm. Also verify the top width (16.3 mm), height (13 mm), and angle (40°) match your pulley requirements.
- What should I send to get a quote?
- Send the part number SPB 3070 and the quantity you need. If you have a photo of the old belt's marking or the drive setup, that can help us confirm the match.
- Can I replace just one belt on a multi-belt drive?
- For best performance, replace all belts on the same drive at the same time. This helps maintain even tension and load distribution. Provide the quantity you need when requesting a quote.