V-belt Optibelt SPB 3050
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3050 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3050 and any equivalents.
This Optibelt SPB 3050 is a narrow wedge V-belt in the SK S=C Plus series. It has an SPB profile, a 3050 mm length, a 16.3 mm top width, a 13 mm height and a 40° angle. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Check sheave grooves for wear, rust, burrs or embedded debris. Worn grooves can let a new narrow wedge V-belt sit too deep, causing slip and heat. Confirm the sheaves are aligned and the shafts turn freely. If a sheave is damaged, correct it before fitting the Optibelt SPB 3050.
Measure the old belt and compare the marking on its back with the required part number. Confirm the SPB profile, the 3050 mm length and the 16.3 mm top width, 13 mm height and 40° angle. On multi-belt drives, replace all belts as a set so the load is shared evenly.
After fitting, check tension and re-check it after the first run-in period. Keep the drive clean and free of oil or debris. For a quote, send the part number, the quantity and the drive details by WhatsApp or email.
Dimensions
- Section
- SPB
- Length
- 3050mm
Frequently asked questions
- What should I check before fitting this Optibelt SPB 3050 belt?
- Inspect the sheaves for wear, rust, burrs or debris, confirm alignment and make sure the shafts turn freely. Correct any sheave damage before fitting the new belt.
- How do I confirm the belt matches my drive?
- Compare the marking on the back of the old belt with the required part number. Confirm the SPB profile, the 3050 mm length and the 16.3 mm top width, 13 mm height and 40° angle.
- What do I need to send for a quote?
- Send the part number, the quantity and the drive details by WhatsApp or email. The team can help confirm the right belt.