V-belt Optibelt SPB 3000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3000 and any equivalents.
The Optibelt SPB 3000 is a narrow wedge V-belt in the SK metric profile series. It has an SPB profile, a 3000 mm length, a 16.3 mm top width, a 13 mm height and a 40 degree angle. Use these dimensions to match it to the belt you are replacing.
Start with the marking on the back of the old belt. If it reads SPB 3000, this belt matches that profile and length. Confirm the top width and height against the removed belt, and check the angle where the belt sits in the pulley groove. A belt that is too wide or too narrow will not seat correctly.
The same size is also listed under Stark SPB 3000 and Mitsuboshi SPB 3000. If your drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves. Inspect the pulleys for wear, alignment and buildup before installing the new belts.
To request a quote, send the part number SPB 3000, the quantity and the drive or equipment reference by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 3000mm
Frequently asked questions
- How do I confirm the Optibelt SPB 3000 is the right belt?
- Check the marking on the back of the belt you are replacing. It should read SPB 3000. Also measure the top width, height and length, and confirm the belt seats correctly in the pulley groove.
- What are the dimensions of this belt?
- It has an SPB profile, a 3000 mm length, a 16.3 mm top width, a 13 mm height and a 40 degree angle.
- What should I send to get a quote?
- Send the part number SPB 3000, the quantity you need and the drive or equipment reference by WhatsApp or email. The team can help confirm the right belt or suggest an equivalent.