V-belt Optibelt SPB 2950
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2950 and any equivalents.
The Optibelt SPB 2950 is a narrow wedge V-belt in the SK S=C Plus series. It has a 16.3 mm top width, 13 mm height, 40° angle, and a 2950 mm length. Before fitting this belt, inspect the drive and sheaves to confirm they are in good condition.
Check sheave grooves for wear, cracks, or embedded debris. Worn grooves can cause a new belt to slip or wear quickly. Verify that the sheaves are aligned and that the correct SPB profile is used. The 40° angle and 16.3 mm top width must match the sheave groove.
Inspect the bushing, shaft, and key for damage. Ensure the sheave runs true and that there is no excessive end play. Clean the grooves with a soft brush or cloth. Do not use solvents that could damage the sheave.
After fitting the Optibelt SPB 2950, check tension according to the drive manufacturer's instructions. Recheck tension after the first few hours of operation. Keep the drive free of oil, dust, and debris. If you need help confirming this belt for your drive, send the part number and drive details for a quote.
Dimensions
- Section
- SPB
- Length
- 2950mm
Frequently asked questions
- What should I check on the sheaves before installing this belt?
- Inspect the sheave grooves for wear, cracks, or debris. Ensure the grooves match the SPB profile with a 16.3 mm top width and 40° angle. Check alignment and that the sheave runs true.
- How do I confirm the Optibelt SPB 2950 is the right belt for my drive?
- Compare the belt marking on the old belt to the Optibelt SPB 2950. The profile should be SPB and the length 2950 mm. Also verify the top width of 16.3 mm and height of 13 mm. If unsure, send the part number and drive details for a quote.
- What information do you need to quote this belt?
- Provide the part number Optibelt SPB 2950 or the complete marking from the old belt. Include the drive details such as sheave diameters and center distance if you need help confirming the correct belt.