V-belt Movendis P-SPZ1437
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1437 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1437 and any equivalents.
Matching a narrow wedge V-belt starts with the marking on the old belt. The Movendis P-SPZ1437 is an SPZ profile belt with a 1437 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. Compare those figures directly with the belt you are replacing before you request a quote.
Read the back of the old belt and note the profile and length. An SPZ profile belt is a narrow wedge V-belt, and the 1437 mm length is the dimension to match. Check the top width of 9.7 mm and the height of 8 mm against the belt you remove, and confirm the 40° angle matches the pulley groove.
If the marking is worn or missing, measure the belt and check the drive. The profile, length, top width, height and angle on the Movendis P-SPZ1437 give you the figures to compare. Send the part number, the belt marking or your measurements and the drive details by WhatsApp or email, and the team can help confirm the right belt.
For a quote, include the part number P-SPZ1437 or the full marking from the old belt. If you are replacing more than one belt on the same drive, send the quantity and the position of each belt so the team can review the set.
Dimensions
- Section
- SPZ
- Length
- 1437mm
Frequently asked questions
- How do I match the Movendis P-SPZ1437 to the belt I am replacing?
- Compare the profile and length on the old belt with the SPZ profile and 1437 mm length of the P-SPZ1437. Also check the top width of 9.7 mm, the height of 8 mm and the 40° angle against the belt you remove.
- What should I send to request a quote for this belt?
- Send the part number P-SPZ1437, or the full marking from the back of the old belt, along with the quantity you need. If the marking is not readable, send your measurements and the drive details.
- Can you help confirm the right belt if my old belt marking is worn?
- Yes. Send the belt marking if any part is readable, or your measurements of profile, length, top width, height and angle, and the team can help confirm the right belt for the drive.