V-belt Movendis P-SPZ1450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1450 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1450 and any equivalents.
The Movendis P-SPZ1450 is a narrow wedge V-belt in the SPZ profile, measuring 1450 mm in length. It is used in industrial drives where a compact cross-section and precise fit are required. Confirm your drive accepts an SPZ profile and a 1450 mm belt length before ordering.
Narrow wedge V-belts like this SPZ section are common on pumps, fans, compressors and other driven equipment where space is limited and speeds are moderate to high. The 9.7 mm top width and 8 mm height allow the belt to sit correctly in an SPZ pulley groove. The 40° angle is the standard wedge angle for this profile.
To confirm fit, check the marking on your existing belt or the drive documentation. You need an SPZ profile and a 1450 mm length. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1450 mm datum. The belt should sit flush with the pulley rim, not above or below it.
When replacing, inspect the pulleys for wear, alignment and groove condition. A worn pulley can quickly damage a new belt. If you are unsure whether this is the correct belt for your drive, send the part number and a photo of the old belt marking to our team for confirmation.
Dimensions
- Section
- SPZ
- Length
- 1450mm
Frequently asked questions
- What does SPZ mean on this belt?
- SPZ is the profile of this narrow wedge V-belt. It has a 9.7 mm top width, 8 mm height and 40° angle. Use it only in pulleys designed for the SPZ profile.
- How do I confirm the length?
- The belt length is 1450 mm. Check the marking on your old belt or measure the datum length. If you cannot read the marking, contact us with the drive details and we will help confirm.
- Can I use this belt on any SPZ pulley?
- It fits SPZ pulleys that accept a 1450 mm belt. Always inspect pulley grooves for wear and ensure proper alignment before installation.