V-belt Movendis P-SPZ1420
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1420 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1420 and any equivalents.
This Movendis P-SPZ1420 is a narrow wedge V-belt in the SPZ profile with a 1420 mm length. The 9.7 mm top width, 8 mm height and 40° angle match the SPZ cross-section, so the belt fits drives designed for that profile.
When you are selecting by profile and length, the SPZ section and 1420 mm datum length are the two figures that decide fit. The belt is built to the narrow wedge cross-section: 9.7 mm across the top, 8 mm high and a 40° angle. These dimensions suit the smaller pulley grooves that SPZ drives use, so the belt sits correctly and transmits load across the flanks.
If you are replacing an existing belt, check the marking on the back for the profile and length before ordering. A belt that has stretched or worn may no longer show its original size clearly, so measure the drive or compare with the old part number. The P-SPZ1420 is the correct reference when the drive calls for an SPZ belt at 1420 mm.
For a quote, send the part number P-SPZ1420 and the quantity you need. If you are unsure whether this is the right belt for your drive, include the profile and length from the old belt or the drive nameplate, and the team can confirm the SPZ 1420 mm match.
Dimensions
- Section
- SPZ
- Length
- 1420mm
Frequently asked questions
- What do the SPZ profile and 1420 mm length mean for my drive?
- SPZ is the narrow wedge cross-section, and 1420 mm is the belt length. Together they identify a belt that fits drives designed for the SPZ profile at that length.
- How can I confirm this is the right replacement belt?
- Look at the marking on the back of the old belt for the profile and length. If it reads SPZ and 1420 mm, this belt matches. If the marking is worn, measure the drive or send the old part number for confirmation.
- What should I send to request a quote?
- Send the part number P-SPZ1420 and the quantity you need. If you want the team to verify the fit, include the old belt marking or the drive details.