V-belt Movendis P-SPZ1412

MOVENDIS P-SPZ1412 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1412 and any equivalents.

The Movendis P-SPZ1412 is a narrow wedge V-belt in the SPZ profile, with a 1412 mm length. It measures 9.7 mm across the top, 8 mm in height and a 40-degree angle. When you are replacing a belt on a driven machine, matching these dimensions to the belt you are removing is the first step.

Start with the belt currently on the drive. Read the marking on the back: it should show the profile and length. If it reads SPZ and 1412, this Movendis belt matches those two key figures. Then check the cross-section with a caliper or a worn belt gauge. The top width should be 9.7 mm, the height 8 mm and the angle 40 degrees. A belt that has worn thin or narrow can measure differently, so compare against the original specification where possible.

If the old belt is unmarked or missing, measure the drive instead. Confirm the groove profile is SPZ and measure the datum length around the pulley path. A 1412 mm length is the figure to match. Because this is a narrow wedge V-belt, it sits deeper in the groove than a classic V-belt of the same top width, so do not substitute a different profile without checking the pulley grooves.

For a quote, send the part number P-SPZ1412, the quantity and any details from the old belt marking. If you are unsure whether this is the correct replacement, include a photo of the belt back and the pulley grooves. We carry the Movendis narrow wedge V-belt line and can confirm the SPZ profile and 1412 mm length against your application.