V-belt Movendis P-SPZ1387
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1387 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1387 and any equivalents.
The Movendis P-SPZ1387 is a narrow wedge V-belt in the SPZ profile. It measures 1387 mm in length, 9.7 mm across the top, 8 mm in height, and has a 40-degree angle. This page covers how to confirm it matches the belt you are replacing.
Start by reading the marking on the back of the old belt. A narrow wedge V-belt is identified by its profile and its length, so look for SPZ and the length figure. If the marking shows SPZ and 1387, the P-SPZ1387 matches those two dimensions. If the marking is worn or unreadable, measure the belt instead: top width, height, and outside length.
The P-SPZ1387 is an SPZ profile belt with a 9.7 mm top width, 8 mm height, and 40-degree angle. The length is 1387 mm. These are the dimensions to compare against your existing belt before ordering. A belt that is close in profile but different in length will not sit correctly in the pulley grooves.
When you request a quote, send the part number P-SPZ1387 or the marking from the old belt. If you have the profile and length from the belt back, include those as well. The team can confirm the match and help you identify the correct replacement.
Dimensions
- Section
- SPZ
- Length
- 1387mm
Frequently asked questions
- How do I confirm the P-SPZ1387 is the right belt?
- Check the marking on the back of your old belt for SPZ and 1387. If it matches, this belt has the same profile and length. You can also measure the top width, height, and length and compare them to 9.7 mm, 8 mm, and 1387 mm.
- What if the marking on my old belt is unreadable?
- Measure the belt's top width, height, and outside length. The P-SPZ1387 has a 9.7 mm top width, 8 mm height, and 1387 mm length. Send those measurements with your quote request and the team can help confirm the profile and length.
- What information should I send to request a quote?
- Send the part number P-SPZ1387, or the full marking from the old belt. If you have the profile and length, include those too. The team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.