V-belt Movendis P-SPZ1462
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1462 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1462 and any equivalents.
The Movendis P-SPZ1462 is a narrow wedge V-belt in the SPZ profile with a 1462 mm length. This page gives you the dimensions you need to match it to the belt being replaced.
Start with the belt on the drive. Read the marking on the back: if it shows an SPZ profile and a 1462 mm length, the P-SPZ1462 is the direct match. The profile sets the fit in the pulley groove, and the length sets the center distance, so both must agree with the old belt.
Check the cross-section against the data here. The P-SPZ1462 has a 9.7 mm top width, an 8 mm height and a 40° angle. Compare those to the worn belt before ordering, especially if the old marking is faded or worn away.
If the marking is unreadable, measure the outside length and the top width. Send the part number from the old belt, or the profile and length you measured, by WhatsApp or email. We carry the Movendis P-SPZ1462 and can confirm it against your drive details.
Dimensions
- Section
- SPZ
- Length
- 1462mm
Frequently asked questions
- How do I confirm the P-SPZ1462 fits my drive?
- Match the profile and length on the old belt's back marking to SPZ and 1462 mm. Then compare the cross-section: 9.7 mm top width, 8 mm height, 40° angle.
- What should I send for a quote?
- Send the part number P-SPZ1462, or the profile and length from the old belt. If the marking is gone, send the measured top width and outside length.
- Can you help if the old belt marking is unreadable?
- Yes. Send the drive details and any measurements you can take. We will confirm the P-SPZ1462 against the SPZ profile and 1462 mm length.