V-belt Mitsuboshi SPZ 900
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 900 and any equivalents.
The Mitsuboshi SPZ 900 is a narrow wedge V-belt in the SPZ profile, measuring 900 mm in length. Before you fit it, take a few minutes to inspect the drive and the sheaves it will run on.
Worn or misaligned sheaves shorten belt life regardless of the belt you install. Check groove wear, look for burrs or debris in the grooves, and confirm the sheaves are aligned and free of oil or grease. A belt seated in a damaged groove will slip or wear unevenly from the first day of service.
This belt has a 9.7 mm top width, 8 mm height and a 40 degree angle. If you are replacing a belt on a multi-belt drive, fit the full set at once so the load stays evenly shared across the grooves. Note the part number and profile from the marking on the back of the old belt before you remove it.
The same size is also listed under Stark SPZ 900, Optibelt SPZ 900 and Gates SPZ 900. Send us the part number, the number of belts you need, and a photo of the drive or the old belt marking, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I request a quote for the Mitsuboshi SPZ 900?
- Send the part number, the quantity you need, and any details from the old belt marking by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, burrs and contamination, and confirm the sheaves are aligned. These checks help the new belt seat correctly and wear evenly.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. Fitting a full matched set keeps the load shared evenly across the grooves and avoids the new belt carrying more than its share.