V-belt Mitsuboshi SPZ 925
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 925 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 925 and any equivalents.
This Mitsuboshi SPZ 925 is a narrow wedge V-belt with an SPZ profile. It measures 9.7 mm across the top, 8 mm in height and has a 40° angle. Use these dimensions to confirm it matches the drive before you order.
Narrow wedge V-belts are common on industrial drives where space is tight and speeds are higher than standard V-belt drives allow. The SPZ profile is a metric narrow section, so it is often found on imported machinery and compact drive packages. If your drive uses an SPZ pulley groove, this belt is the correct section.
To confirm fit, check the belt marking on the old belt and compare the profile and length. This belt is marked SPZ 925, so the profile is SPZ and the length is 925 mm. Also check the top width and height: 9.7 mm by 8 mm. The 40° angle is the standard wedge angle for this section. The same size is also listed under Optibelt SPZ 925.
If you are replacing a worn belt, inspect the pulleys for wear and alignment before installing the new one. A worn groove can cause a new belt to run loose or slip. For a quote, send the part number SPZ 925 and the quantity you need.
Dimensions
- Section
- SPZ
Frequently asked questions
- What does the SPZ profile mean?
- SPZ is a narrow wedge V-belt section. This belt has a 9.7 mm top width, 8 mm height and 40° angle, which matches SPZ pulley grooves.
- How do I confirm this belt fits my drive?
- Check the old belt marking for SPZ 925. Also measure the top width and height: 9.7 mm and 8 mm. If those match, the belt will fit an SPZ pulley.
- Can I get a quote for this belt?
- Yes. Send the part number SPZ 925 and the quantity you need by WhatsApp or email, and we will reply promptly.