V-belt Mitsuboshi SPZ 937
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 937 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 937 and any equivalents.
This Mitsuboshi SPZ 937 is a narrow wedge V-belt with an SPZ profile. The profile and length are the two dimensions to match when replacing a belt on a compact, high-speed drive. Use the marking on the old belt to confirm both before you order.
The SPZ profile is a narrow wedge section: 9.7 mm across the top, 8 mm high, with a 40° angle. The 937 mm length is the datum length for this belt. On a drive that uses SPZ section pulleys, these two values determine fit and tension behavior. If the old belt is worn or the marking is unreadable, measure the drive or send the machine details so we can help confirm the right belt.
The same size is also listed under Stark SPZ 937 and Optibelt SPZ 937. When you request a quote, include the part number, the quantity, and the drive or equipment it runs on. We carry Mitsuboshi belts and reply by WhatsApp or email.
Inspect the pulleys and the belt path when you replace an SPZ belt. Check for worn grooves, misalignment, and oil or debris. On drives with multiple belts, replace the full set so the load stays even across the belts.
Dimensions
- Section
- SPZ
Frequently asked questions
- What does the SPZ profile mean for this belt?
- SPZ is a narrow wedge V-belt profile. This belt has a 9.7 mm top width, 8 mm height, and 40° angle. It fits pulleys cut for the SPZ section.
- How do I confirm the 937 mm length?
- Check the marking on the back of the old belt. If it is worn, measure the drive or send us the machine details and the current belt number so we can help confirm the right belt.
- What should I send to request a quote?
- Send the part number SPZ 937, the quantity, and the drive or equipment it runs on. We reply by WhatsApp or email.