V-belt Mitsuboshi SPZ 812
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 812 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 812 and any equivalents.
This Mitsuboshi SPZ 812 is a narrow wedge V-belt with an SPZ profile and a length of 812 mm. Narrow wedge belts like this are used in industrial drives where a compact cross-section carries the load. The same size is also listed under Optibelt SPZ 812.
When you need to confirm fit, start with the marking on the existing belt. Match the profile SPZ and the length 812 mm, then check the top width of 9.7 mm, the height of 8 mm and the 40-degree angle against the pulley groove. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 812 mm before ordering.
Narrow wedge V-belts are common on drives that run at higher speeds or need a smaller pulley diameter than a classic V-belt. This SPZ profile is a metric narrow section, so it is often found on imported machinery and compact drive packages. Inspect the pulleys for wear, alignment and correct groove angle before installing a replacement.
To request a quote, send the part number SPZ 812, the quantity and any details from the belt back. If you are replacing a set, include the number of belts on the drive so we can help you confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt marking for SPZ and 812 mm. Also verify the top width of 9.7 mm, the height of 8 mm and the 40-degree angle match your pulley groove.
- What should I send to get a quote?
- Send the part number SPZ 812, the quantity you need and the number of belts on the drive if you are replacing a set.
- Is this belt listed under other brands?
- Yes, the same size is also listed under Optibelt SPZ 812.