V-belt Gates SPZ 1900
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1900 and any equivalents.
The Gates Super HC SPZ 1900 is a narrow wedge V-belt with an SPZ profile and a 1900 mm length. It measures 9.7 mm across the top, 8 mm in height, and has a 40-degree angle. Narrow wedge belts like this are used on industrial drives where space is tight and speeds are higher.
To confirm fit, check the old belt's back for the profile and length marking. The SPZ profile and 1900 mm length must match, along with the 9.7 mm top width and 8 mm height. The 40-degree angle is standard for this type. If the marking is worn, measure the top width and the outside length to compare.
This belt is also listed under other brands in the same size: Mitsuboshi SPZ 1900 and Optibelt SPZ 1900. When replacing, inspect all sheaves for wear, alignment, and proper tension. On multi-belt drives, replace all belts at the same time to keep loads even.
For a quote, send the part number SPZ 1900 and the quantity you need. If you are unsure, include a photo of the old belt's marking and the drive setup. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1900mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt for the SPZ profile and 1900 mm length marking. The top width should be 9.7 mm and the height 8 mm. If the marking is unclear, measure these dimensions and compare.
- What should I send to get a quote?
- Send the part number SPZ 1900 and the quantity. If you want us to verify, include a photo of the belt marking and the drive sheaves.
- Is this belt listed under other brands?
- Yes, the same size is also listed under Mitsuboshi SPZ 1900 and Optibelt SPZ 1900.