V-belt Gates SPZ 1887 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1887 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1887 MN and any equivalents.
The Gates SPZ 1887 MN is a narrow wedge V-belt in the Super HC MN series. With an SPZ profile and a length of 1887 mm, it is identified by the marking on the back of the belt. This page covers what that marking tells you and how to use it to specify the correct replacement.
When you read the back of an old belt, the marking is the most direct link to the correct replacement. On this Gates belt, the marking shows the part number SPZ 1887 MN, which combines the SPZ profile with the 1887 mm length. The belt also has a top width of 9.7 mm, a height of 8 mm and a 40° angle. Matching these figures to the old belt helps confirm you are specifying the same size.
The SPZ profile is a narrow wedge section, and the 1887 mm length places it in a specific drive position. If the old marking is worn or unreadable, measure the outside length and check the top width and height against the values above. The part number on the back remains the primary reference when the belt is still legible.
For a quote, send the full marking from the back of the belt, including SPZ 1887 MN. If you have the old belt, note any other numbers printed on it. Our team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- SPZ
- Length
- 1887mm
Frequently asked questions
- How do I identify a Gates SPZ 1887 MN belt from the old belt?
- Look for the marking on the back of the belt. The part number SPZ 1887 MN indicates the SPZ profile and 1887 mm length. You can also check the top width (9.7 mm) and height (8 mm) to confirm.
- What should I send to request a quote for this belt?
- Send the full part number or the complete marking from the back of the old belt, along with the quantity you need. If the marking is unclear, provide the profile and length if known.
- Can you help if the marking on my belt is unreadable?
- Yes. If the marking is worn, measure the outside length and the top width and height. Share those measurements and any remaining digits, and we can help identify the correct belt.