V-belt Gates SPZ 1850 MN

GATES SPZ 1850 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1850 MN and any equivalents.

When a drive belt needs replacing, the marking on the back of the old belt is the fastest way to identify the correct part. This page covers the Gates SPZ 1850 MN from the Super HC MN series, a narrow wedge V-belt with an SPZ profile and a length of 1850 mm. Use the data below to confirm it matches your drive before requesting a quote.

The Gates SPZ 1850 MN is a narrow wedge V-belt in the SPZ profile. It measures 1850 mm in length, 9.7 mm across the top, 8 mm in height, and has a 40° angle. These dimensions define the belt's fit on the pulley grooves and its overall length, so they are the key figures to compare with your existing belt.

To verify a replacement, look for the part number on the back of the belt you are removing. If the marking reads SPZ 1850 MN, this belt matches that specification. The Super HC MN series from Gates uses this marking format, and the profile and length are the primary selection criteria for any narrow wedge V-belt.

If the old belt is worn or the marking is unreadable, measure the top width, height, and length where possible. The SPZ profile and 1850 mm length can then be cross-checked against this belt. For a quote, send the part number SPZ 1850 MN or the dimensions you have recorded, and the team can confirm the belt or suggest an equivalent.