Skip to main content
All products
Gates Super HC narrow wedge V-belt · GATES SPZ 1850
V-belt Gates SPZ 1850

GATESBrand We Carry

V-belt Gates SPZ 1850

Manufacturer part numberSPZ 1850Also known as: SPZ1850
Brand
GATES
Subcategory
V-belts
Section
SPZ
Series
Super HC
Get a quote for SPZ 1850 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Other brands for this category

Ask us for alternatives. We check every equivalent against the part number and your application.

GATES and OPTIBELT: matching part numbers →

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

GATES SPZ 1850 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1850 and any equivalents.

This Gates Super HC SPZ 1850 is a narrow wedge V-belt with an SPZ profile and a length of 1850 mm. It has a top width of 9.7 mm, a height of 8 mm, and a 40° angle. To match it to the belt being replaced, compare these dimensions and the marking on the old belt.

Start by reading the marking on the back of the belt you are replacing. You are looking for the profile and length: SPZ and 1850 mm. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper. This belt has a 9.7 mm top width and an 8 mm height. The 40° angle is another specification to verify when the belt is new and seated in the pulley groove.

The same size is also listed under Optibelt SPZ 1850. If you need to confirm the right belt or discuss an equivalent, send the part number and any photos of the old belt via WhatsApp or email. The team replies promptly and can help you verify the profile and length before you order.

Dimensions

Section
SPZ
Length
1850mm

Frequently asked questions

How do I match this belt to the one I am replacing?
Check the marking on the old belt for SPZ and 1850 mm. Also compare the top width (9.7 mm), height (8 mm), and 40° angle. If the marking is worn, measure the old belt with a caliper.
What should I send for a quote?
Send the part number SPZ 1850, the brand Gates, and the quantity you need via WhatsApp or email. If you are unsure, include photos of the old belt and any markings.
Is this belt listed under other brands?
Yes, the same size is also listed under Optibelt SPZ 1850.
Get a quote for SPZ 1850 on WhatsApp
Quote on WhatsApp