V-belt Gates SPZ 1900 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1900 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1900 MN and any equivalents.
This Gates SPZ 1900 MN belt is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact, high-capacity belt is needed, such as on pumps, fans, compressors and machine tools. To confirm fit, check that the existing belt is marked SPZ and 1900, and that the drive pulley groove matches the SPZ profile.
The SPZ profile has a 9.7 mm top width and an 8 mm height, with a 40° angle. The 1900 mm length is the datum length. When replacing, compare these dimensions with the marking on the old belt. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to identify the correct profile and length.
Narrow wedge V-belts like this SPZ 1900 MN are common on drives that need to transmit more power in less space than a classical V-belt. They are often found on industrial equipment such as air handlers, blowers and process machinery. Because the belt runs in a matched groove, the pulley condition matters: check for wear, glazing or debris that can affect belt life and alignment.
For a quote, send the part number SPZ 1900 MN, the quantity, and any details from the old belt marking. If you are unsure about the profile or length, include a photo of the belt and the pulley groove. The team can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Section
- SPZ
- Length
- 1900mm
Frequently asked questions
- How do I confirm that this SPZ 1900 MN belt fits my drive?
- Check the marking on the old belt for SPZ and 1900. Also verify the pulley groove is for an SPZ profile. If the marking is gone, measure the top width (9.7 mm) and the length (1900 mm) and compare with the data for this belt.
- What should I send to request a quote for this belt?
- Send the part number SPZ 1900 MN, the quantity you need, and any marking from the old belt. If you have a photo of the belt or the drive, include it so the team can help confirm the profile and length.
- Can I use this belt on a drive that currently has a different profile?
- No. The SPZ profile has a specific top width and angle that must match the pulley groove. Using a different profile can cause poor performance and premature wear. Always match the profile and length to the drive requirements.