V-belt Optibelt SPZ 1900
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1900 and any equivalents.
The Optibelt SPZ 1900 is a narrow wedge V-belt in the SK metric profile line. It has an SPZ profile, a 1900 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle. Before fitting this belt, inspect the drive and sheaves.
Check sheave grooves for wear, rust, burrs or embedded debris. Worn or damaged grooves can shorten belt life and cause slippage or vibration. Confirm that the sheave profile matches the SPZ profile and that the grooves are clean and true.
Verify alignment between the driving and driven sheaves. Misalignment accelerates edge wear and can cause the belt to run out of the groove. Also check the condition of the drive: worn bearings, loose mounts or a failing tensioner can affect the new belt.
Set the correct tension according to the drive manufacturer's procedure after installation. Recheck tension after the initial run-in period. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- SPZ
- Length
- 1900mm
Frequently asked questions
- What are the dimensions of the Optibelt SPZ 1900?
- It has an SPZ profile, a 1900 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Mitsuboshi SPZ 1900 and Gates SPZ 1900.
- What should I check before installing this belt?
- Inspect sheave grooves for wear and debris, verify drive alignment, and check bearings, mounts and the tensioner. After installation, set tension and recheck it after run-in.