V-belt Stark A 58
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 58 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 58 and any equivalents.
The Stark A 58 is a classical V-belt with an A profile. To match it to the belt you are replacing, read the marking on the back of the old belt and compare the profile and the length. This page gives the dimensions you need to confirm the match.
The profile is A. The top width is 13 mm and the height is 8 mm. The angle is 40 degrees. These are the dimensions to check against the belt currently on the drive. If the old belt is worn or the marking is unreadable, measure the top width and the height at a straight section and compare them to these values.
The same size is also listed under Optibelt A 58. If your drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear, rust or debris before installing the new belt, and check that the belt sits correctly in the groove.
For a quote, send the part number A 58 and the quantity you need by WhatsApp or email. If you are unsure whether this is the correct belt, include the marking from the old belt and the drive details. The team replies promptly and can help confirm the right belt.
Dimensions
- Section
- A
Frequently asked questions
- How do I confirm the Stark A 58 matches the belt I am replacing?
- Read the marking on the back of the old belt and compare the profile and the length. The Stark A 58 has an A profile, a 13 mm top width, an 8 mm height and a 40 degree angle.
- What should I send to request a quote for the Stark A 58?
- Send the part number A 58 and the quantity you need by WhatsApp or email. If you are unsure about the match, include the marking from the old belt and the drive details.
- Is the same size listed under another brand?
- Yes, the same size is also listed under Optibelt A 58.