V-belt Stark A 57
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 57 and any equivalents.
The Stark A 57 is a classical V-belt with an A profile, a 13 mm top width, an 8 mm height and a 40° angle. When you are replacing a belt, match the profile and the part number on the old belt first, then confirm the dimensions against the drive.
The cleanest way to match this belt is to read the marking on the back of the belt you are removing. If it shows A 57, this Stark belt is the same profile and size. The same size is also listed under Mitsuboshi A 57 and Optibelt A 57, so you can compare markings across brands without changing the profile or the length.
If the old marking is worn or missing, check the drive instead. Measure the top width and the height of the belt cross-section and compare them with the 13 mm top width and 8 mm height listed here. Confirm the 40° angle as well. A profile that is too wide or too narrow will not sit correctly in the pulley groove.
For a quote, send the part number A 57 and the quantity you need. If you are unsure whether this is the right belt, send a photo of the marking on the old belt and the pulley dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
Frequently asked questions
- How do I confirm the Stark A 57 matches the belt I am replacing?
- Check the marking on the back of the old belt. If it reads A 57, the profile and size match. You can also measure the cross-section: this belt has a 13 mm top width, an 8 mm height and a 40° angle.
- What information should I send to request a quote?
- Send the part number A 57 and the quantity. If you want confirmation before ordering, include a photo of the old belt marking and the pulley dimensions.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi A 57 and Optibelt A 57.