SKF PER.FHS207A y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.FHS207A belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.FHS207A and any equivalents.
The SKF PER.FHS Y-bearing is a screw-locked insert that fits split plummer block housings and bearing units. It suits equipment that needs a secure hold but also comes apart easily for service, such as conveyors, mixers and farm machinery. MR Industrial Accessories supplies this line and can help you match the right variant to your shaft and working conditions.
Break the code down and ordering gets simpler. PER marks the screw-locking insert series. FHS covers the locking method and the outer ring shape. The digits in place of the # give the shaft size, and a trailing A points to a sealing or design variation. So PER.FHS207A is built for a 35 mm shaft. Reading the code this way lets you pull the exact replacement without guesswork.
You will find these inserts in belt conveyors, bucket elevators, mixers, mills and processing lines across the food, chemical and agricultural sectors. Because they seat in split plummer block housings, a bearing change does not require pulling the whole shaft assembly, which keeps maintenance quick and downtime short.
Before you order, confirm three things: shaft diameter, locking style and the seal that matches your environment. Screw locking holds firmly, but the screws need the recommended torque and the shaft must be free of burrs. Use the lubricant the manufacturer specifies, and check housing alignment so the bearing does not pick up unnecessary axial load.
Inserts from different brands often swap if the main dimensions and locking method line up, yet seals and tolerances can differ. When you replace one, compare the full part number and the operating conditions rather than just the shaft size. Our team can point you to suitable equivalents without hurting equipment performance.
To request the SKF PER.FHS Y-bearing, send the part number by WhatsApp or email. We will quote it and help you confirm it is the right variant for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I read the PER.FHS207A designation?
- PER is the screw-locking insert series, FHS is the locking type, 207 is the shaft diameter (35 mm), and A is a design variant. Always check the complete part number on the old bearing or in the equipment manual.
- Will this insert fit any housing?
- No. The PER.FHS Y-bearing needs a housing that matches its outer ring and locking system. The housing dimensions and locking method must correspond for a safe mount.
- How can I tell if it replaces the bearing I have?
- Compare the complete part number, shaft diameter and locking type. If anything is unclear, send a photo or the part number by WhatsApp and we will help you identify the right equivalent from the SKF line we carry.