SKF PER.FHR6005-XD-D y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.FHR6005-XD-D belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.FHR6005-XD-D and any equivalents.
The SKF PER.FHR-XD-D is a Y-bearing insert that locks to the shaft with set screws and mounts in split or solid housings. It handles slight misalignment and its sealing protects against dust and moderate moisture, making it a practical replacement in industrial maintenance.
The code breaks down into functional blocks. PER identifies the insert series. FHR covers the locking and sealing arrangement. XD refers to the outer ring design, and D to sealing or tolerance variants. When a number follows, as in PER.FHR6005-XD-D, it points to the size of the base bearing. Reading the full code removes any doubt about the part you need.
Typical applications include conveyors, belts, elevators, mixers and process equipment. In food plants, cement plants, paper mills and cold storage facilities, washing and dust call for reliable sealing. The same bearing appears in agricultural machinery and packaging lines. As an insert, it fits housings that MR manufactures or supplies, which simplifies replacement.
Selection depends on shaft diameter and locking method. Set screw locking requires adequate shaft hardness, and the screws must be tightened with a torque wrench. Check the sealing: for water or fine dust, a reinforced seal is advisable. Use the lubricant indicated by the manufacturer and align the assembly to avoid parasitic axial loads.
Y-bearings are interchangeable between brands when dimensions, locking and sealing match. Shaft diameter alone is not enough: compare total width, screw position and seal type. SKF is a brand MR supplies, and equivalent alternatives are available. Always validate interchangeability using the complete code.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the PER.FHR-XD-D designation mean?
- The letters indicate series, locking type, outer ring design and sealing variant. The number that follows, such as 6005, identifies the base bearing size. With the complete code you can request the exact part.
- How is this Y-bearing mounted?
- It is inserted into the housing and fixed to the shaft with set screws, tightened to the recommended torque. Keep the shaft clean and free of burrs, and ensure correct alignment to avoid unnecessary stress.
- Is it suitable for environments with water or dust?
- Yes, the XD sealing is designed for those conditions. If washing is frequent or dust is abrasive, verify the sealing and lubrication. Send us your working conditions and we will guide you.