V-belt Optibelt SPC 7500 BP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Blue Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 7500 BP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 7500 BP and any equivalents.
This Optibelt Blue Power belt is a narrow wedge V-belt with an SPC profile and a length of 7500 mm. The profile sets the cross-section that must match your pulley grooves, and the length is the datum you check against the belt you are replacing.
For a maintenance or purchasing professional, the two numbers that decide whether this belt fits are SPC and 7500 mm. Confirm the existing belt is an SPC profile, then confirm the length marking before you order. A belt that is close but not the same profile or length will not run correctly on the same drive.
Narrow wedge V-belts are used where a compact cross-section carries the drive load. This belt is part of the Optibelt Blue Power series, which we carry. If you are replacing a belt on a drive that runs several belts, check the condition of the others and plan to replace them as a set so the load stays even across the grooves.
To request a quote, send the part number Optibelt SPC 7500 BP, or send the marking from the back of the old belt. If the marking is worn, send the profile and length you measured, along with a photo of the drive and the pulley grooves. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPC
- Length
- 7500mm
Frequently asked questions
- What do the profile and length mean on this belt?
- SPC is the profile, which determines the cross-section that fits the pulley grooves. 7500 mm is the length. Both must match the drive for the belt to seat and run correctly.
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt you are replacing. If it shows SPC and 7500 mm, this is the same size. If the marking is not clear, measure the length and check the profile against the pulley groove.
- What should I send to get a quote?
- Send the part number Optibelt SPC 7500 BP, or send the profile and length from the old belt. A photo of the drive and the pulley grooves helps us confirm the match.