V-belt Optibelt SPC 7500 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 7500 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 7500 BP2 and any equivalents.
The Optibelt SPC 7500 BP2 is a narrow wedge V-belt in the Blue Power 2 series. It has an SPC profile and a length of 7500 mm. Use this page to match the belt you are replacing before you request a quote.
To match this belt, start with the marking on the back of the belt you are removing. You need the profile and the length: SPC and 7500 mm. If the old belt reads SPC 7500, this Optibelt belt is the same profile and length. Check that the drive uses an SPC groove section and that the belt path matches the 7500 mm length.
When the marking is worn or unreadable, measure the outside length of the old belt and confirm the cross-section. An SPC profile is a specific narrow wedge section, so the groove width and angle must match. Do not substitute a different profile or length without checking the drive.
Send the part number SPC 7500 BP2, or the marking from your old belt, by WhatsApp or email. Our team will confirm the belt or suggest an equivalent. If you are replacing multiple belts on the same drive, include the quantity and the position so we can help you keep the set matched.
Dimensions
- Section
- SPC
- Length
- 7500mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the old belt marking for SPC and 7500 mm. If both match, the Optibelt SPC 7500 BP2 is the same profile and length. Also confirm the drive uses an SPC groove section.
- What should I send to get a quote?
- Send the part number SPC 7500 BP2, or the full marking from the belt you are replacing, by WhatsApp or email. Include the quantity if you are ordering more than one.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the outside length and the cross-section of the old belt, and send those details. We will help identify the correct profile and length.