V-belt Optibelt SPC 7500 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 7500 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 7500 RP and any equivalents.
When replacing a narrow wedge V-belt, the first step is to match the belt you are removing. This Optibelt SPC 7500 RP belt has an SPC profile and a length of 7500 mm, and it is part of the Red Power 3 S=C Plus series. Use the marking on the old belt to confirm these two values before you order.
Check the back of the belt being replaced for the profile and length. The profile is usually printed as a short code such as SPC, and the length appears in millimeters. If the old belt reads SPC and 7500 mm, this Optibelt belt matches those dimensions. If the marking is worn or missing, measure the outside length and compare it to 7500 mm, and confirm the cross-section matches the SPC profile.
For a reliable replacement, also inspect the drive. Look for uneven wear, cracks, glazing, or contamination on the pulley grooves. A belt that has run hot or slipped may have damaged the pulleys, and a new belt can wear quickly if the drive is not in good condition. When multiple belts run together, replace them as a set so the load stays even across all belts.
Dimensions
- Section
- SPC
- Length
- 7500mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the profile and length marked on your old belt. This belt is SPC profile with a length of 7500 mm. If your old belt shows the same profile and length, it is the correct match.
- Can I use this belt to replace a different brand?
- Yes, as long as the profile is SPC and the length is 7500 mm. The part number for this belt is SPC 7500 RP, and it is a narrow wedge V-belt from Optibelt.
- What information should I send for a quote?
- Send the part number SPC 7500 RP, or provide the profile and length from your old belt. If you have a photo of the marking on the back of the belt, that also helps us confirm the correct item.