V-belt Optibelt SPC 7100 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 7100 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 7100 RP and any equivalents.
The Optibelt SPC 7100 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. Its SPC profile and 7100 mm length are the two figures to match when replacing a belt on high-load industrial drives.
Profile and length are the primary selection criteria here. SPC is a narrow wedge profile, so the belt sits in an SPC-section pulley groove; the 7100 mm length is the datum to compare against the belt you are removing. Confirm both against the drive before ordering, because a different profile will not seat correctly and a different length will not tension correctly.
The belt is marked SPC 7100 RP on the back, along with the Optibelt name and the Red Power 3 S=C Plus series. When you read an installed belt, that marking is usually the quickest way to identify what is on the drive. If the marking is worn or unreadable, measure the outside length and check the groove dimensions instead.
We carry the Optibelt SPC 7100 RP for maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and the team will confirm the belt or suggest an equivalent. For a faster reply, include the drive details and the marking from the old belt.
Dimensions
- Section
- SPC
- Length
- 7100mm
Frequently asked questions
- What do the SPC and 7100 in this part number tell me?
- SPC is the narrow wedge profile and 7100 is the length in millimeters. Both need to match the pulley groove and the drive layout.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt. If it shows SPC 7100 RP, this is the same belt. If it is worn, measure the length and check the pulley groove.
- What should I send with a quote request?
- Send the part number SPC 7100 RP, plus the drive details and the marking from the old belt if you have them. Photos of the belt and pulley also help.