Timing belt Optibelt 75 AT10 / 1400 AFX

OPTIBELT 75 AT10 / 1400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 1400 AFX and any equivalents.

The Optibelt 75 AT10 / 1400 AFX is an Alpha Flex timing belt with an AT10 profile, a 1400 mm length and a 10 mm pitch. If you are replacing a belt on an existing drive, the marking on the back of the old belt is the fastest way to confirm you are ordering the same item. Read it before you send your request.

Most timing belts carry their identification printed or molded on the back. On this belt that marking reads 75 AT10 / 1400 AFX. The AT10 tells you the profile, the 1400 gives the length in millimeters, and the 10 mm pitch is the distance from one tooth center to the next. Write the marking down exactly as it appears rather than working from a measurement or a drawing, since a belt that looks close can still be the wrong profile or length for the pulleys.

When you send the marking to MR Industrial Accessories, include the part number and the quantity you need. We carry the Optibelt Alpha Flex line and quote by part number through WhatsApp or email. If the belt on your drive is worn, check the pulleys as well: tooth wear, debris in the grooves and misalignment all shorten belt life, and a new belt fitted to a worn pulley will not run correctly. Where a drive uses more than one belt, replace them as a set so the load stays even across the drive.