Timing belt Optibelt 75 AT10 / 1200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT10 / 1200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 1200 AFX and any equivalents.
The Optibelt 75 AT10 / 1200 AFX is an Alpha Flex timing belt with an AT10 profile, a 1200 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or embedded debris, and confirm they are clean and aligned. Verify that the shafts turn freely, that bearings are sound and that tensioning hardware moves without binding. A drive that is not square or that has damaged sheaves will shorten the life of any timing belt.
Confirm the belt marking on the old part matches the profile and length you need. This Optibelt Alpha Flex belt is identified by the code 75 AT10 / 1200 AFX, with an AT10 profile, a 1200 mm length and a 10 mm pitch. Send that code, or the full marking from the back of the belt, when you request a quote.
When you replace a timing belt, inspect the whole drive rather than only the belt. Look for uneven wear on the sheaves, oil or coolant contamination, and any sign of rubbing on guards or covers. Correcting those conditions before fitting the new belt helps protect the drive and keeps maintenance intervals predictable.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1200mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, damage or debris, confirm they are clean and aligned, check that the shafts spin freely and that the tensioner operates correctly. Address any issues before installing the Optibelt 75 AT10 / 1200 AFX.
- How do I identify the correct replacement belt?
- Use the marking on the back of the old belt. This belt is the Optibelt 75 AT10 / 1200 AFX, with an AT10 profile, a 1200 mm length and a 10 mm pitch. Send that code when you request a quote.
- What information do you need to quote this belt?
- Send the part number 75 AT10 / 1200 AFX, or the complete marking from your old belt, along with the quantity you need. We will confirm the belt and reply by WhatsApp or email.