Timing belt Optibelt 75 AT10 / 1300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT10 / 1300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 1300 AFX and any equivalents.
The Optibelt 75 AT10 / 1300 AFX is an Alpha Flex timing belt with an AT10 profile, a 1300 mm length and a 10 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs or debris that can damage the belt teeth. Confirm alignment between pulleys and verify that the tensioner moves freely. A drive that is out of alignment or has damaged sheaves will shorten the life of any timing belt, including this Optibelt Alpha Flex unit.
Match the old belt by reading the marking on its back. The Optibelt 75 AT10 / 1300 AFX is identified by the AT10 profile, the 1300 mm length and the 10 mm pitch. If the marking is worn, measure the old belt and note the tooth profile before ordering.
Send the part number, the belt marking or a photo of the old belt by WhatsApp or email. We carry the Optibelt 75 AT10 / 1300 AFX and can confirm it against your drive or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1300mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheaves for wear, burrs or debris, confirm pulley alignment and make sure the tensioner moves freely. Correct any issues before fitting the new belt.
- How do I identify the Optibelt 75 AT10 / 1300 AFX on an old belt?
- Look for the AT10 profile, the 1300 mm length and the 10 mm pitch on the back of the belt. If the marking is unreadable, measure the old belt and note the profile.
- What information do you need for a quote?
- Send the part number 75 AT10 / 1300 AFX, or the marking from the old belt, by WhatsApp or email. A photo of the old belt also helps us confirm the right item.