Timing belt Optibelt 75 AT10 / 1700 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT10 / 1700 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 1700 AFX and any equivalents.
The Optibelt 75 AT10 / 1700 AFX is an Alpha Flex timing belt with an AT10 profile and a 1700 mm length on a 10 mm pitch. If you are replacing a belt on an existing drive, matching the profile and length on the old belt is the first step. We carry this belt and quote it by part number.
To match it to the belt being replaced, read the marking on the back of the old belt and compare it with the code above. The profile must be AT10 and the length must be 1700 mm; the pitch of 10 mm is set by the profile. A belt of the same profile but a different length will not fit the same drive.
If the old belt is worn or the marking is no longer readable, measure the length along the belt and confirm the tooth profile before ordering. Send the code you find, or the profile and length you measure, and we will confirm the belt against your request.
This belt is a timing belt, also called a synchronous belt, so it transmits motion by tooth engagement rather than friction. Order by the part number above, or send the marking from the belt you are replacing and we will help confirm the right item.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1700mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the AT10 profile and the 1700 mm length. If it matches the code above, it is the same size. If the marking is unreadable, measure the length and identify the tooth profile, then send those details for confirmation.
- What does the 10 mm pitch mean for fit?
- The pitch is the distance from one tooth center to the next. An AT10 profile belt has a 10 mm pitch, so the pulley must be made for that profile. The 1700 mm length must also match the drive.
- How do I request a quote for this Optibelt belt?
- Send the part number 75 AT10 / 1700 AFX by WhatsApp or email. If you are replacing a belt, include the marking from the old belt or the profile and length you measured, and we will confirm the belt for your drive.