V-belt Optibelt 22 x 4064 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 4064 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 4064 Li and any equivalents.
The Optibelt VB S=C Plus 22 x 4064 Li is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle. It measures 4064 mm in length. This page explains how to match it to the belt you are replacing.
The most reliable way to match a classical V-belt is to read the marking on the back of the belt you are removing. Check the profile letter and the length number against this belt: profile C, 22 mm top width, 14 mm height, 40-degree angle, and 4064 mm length. The code 22 x 4064 Li reflects those dimensions. If the old marking is worn or missing, measure the top width and the outside length and compare them to the values above.
A belt that has run for a long time may no longer measure its original size, so take the profile and length from the belt's marking rather than from a stretched belt. Confirm that the sheave groove is clean and free of wear that could affect the fit. When you request a quote, send the full part number, 22 x 4064 Li, along with the profile and length if you have them. Our team can confirm the belt and suggest an equivalent if needed.
Dimensions
- Section
- C
- Length
- 4064mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. If it shows profile C and 4064 mm length, or the code 22 x 4064 Li, this belt matches those dimensions.
- What measurements should I send with my quote request?
- Send the full part number, 22 x 4064 Li, and if possible the profile letter, top width, height, angle, and length. Photos of the old belt marking also help.
- Can you help if my old belt marking is unreadable?
- Yes. Measure the top width and the outside length of the old belt and send those values. We can compare them to the 22 mm top width and 4064 mm length of this belt.