V-belt Optibelt 22 x 4100 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 4100 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 4100 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile and a length of 4100 mm. It is used on industrial drives where a classical V-belt is specified, and the marking on the back of the belt is the reference for confirming fit.
The belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. The profile and length are the two values to match when replacing an existing belt. Check the old belt for the profile letter and the length marking, and compare them with the profile and length shown here.
Classical V-belts of this type are found on drives that run at moderate speeds and require a reliable, simple transmission. Before ordering, inspect the drive for worn sheaves, correct alignment and proper tension. If the drive runs multiple belts, replace them as a set so the load is shared evenly.
To request a quote, send the part number 22 x 4100 Li, the quantity and any details from the belt marking. If you are unsure of the profile or length, a photo of the belt and the drive nameplate helps confirm the correct belt.
Dimensions
- Section
- C
- Length
- 4100mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile and length on the old belt with the C profile and 4100 mm length listed for this belt. The top width is 22 mm and the height is 14 mm. If the markings match, the belt is the correct size.
- What should I send to request a quote?
- Send the part number 22 x 4100 Li, the quantity you need and any marking from the old belt. If the marking is unclear, include a photo of the belt and the drive.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set so all belts carry the load evenly. Mixing new and used belts can cause uneven tension and shorter belt life.