V-belt Optibelt 22 x 4000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 4000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 4000 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile and a length of 4000 mm. The cross-section measures 22 mm at the top and 14 mm in height, with a 40-degree angle. Before fitting it, inspect the drive and sheaves.
Check sheave grooves for wear, burrs, or debris that can cut a new belt. Confirm the sheaves are aligned and the correct width for a 22 mm top width. Turn the drive by hand to feel for binding or damaged bearings.
A worn sheave can quickly ruin a new belt, so correct any groove damage before installation. Verify that the replacement matches the old belt's marking: profile C, 22 mm top width, 14 mm height, 40-degree angle, and 4000 mm length. Tension the belt according to the drive manufacturer's specification.
For a quote, send the part number 22 x 4000 Li and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the drive nameplate.
Dimensions
- Section
- C
- Length
- 4000mm
Frequently asked questions
- What checks should I do before installing this belt?
- Inspect sheave grooves for wear and alignment, and confirm the sheaves are correct for a 22 mm top width. Clean the grooves and check for any damage that could affect belt life.
- How do I confirm this is the right belt for my drive?
- Compare the marking on your old belt with the profile and length of this belt: profile C, 22 mm top width, 14 mm height, 40-degree angle, and 4000 mm length. If the markings match, the belt is the correct size.
- What information do I need to request a quote?
- Provide the part number 22 x 4000 Li and the quantity required. If you have any doubt about the profile or length, include a photo of the belt marking and the drive nameplate.