V-belt Optibelt 22 x 3962 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3962 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3962 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a top width of 22 mm, a height of 14 mm and a 40-degree angle. It is identified by the code 22 x 3962 Li, and the length is 3962 mm. Before fitting it, inspect the drive and sheaves so the new belt starts on a sound drive.
Check the sheaves for wear, grooves that have become narrow or polished, and any burrs or debris that can cut the belt. Confirm the sheave grooves match the C profile and that the belt sits correctly, not bottoming out in the groove. Misaligned sheaves will shorten belt life, so verify alignment with a straightedge or laser before tensioning.
Inspect the rest of the drive as well: bearings for play or roughness, shafts for movement, and guards for clearance. If the old belt failed early, the cause is often in the drive rather than the belt itself. Correct any issues before installing the replacement so the new belt is not damaged by the same conditions.
The belt is marked 22 x 3962 Li, which is the reference to use when ordering. Send that code, along with the Optibelt brand and the VB S=C Plus series, by WhatsApp or email and we will confirm the belt or suggest an equivalent. If you are replacing multiple belts on one drive, send the full set of markings so each position can be matched.
Dimensions
- Section
- C
- Length
- 3962mm
Frequently asked questions
- What does the code 22 x 3962 Li tell me?
- It is the belt's identifying code. The profile is C, the top width is 22 mm, the height is 14 mm, the angle is 40 degrees, and the length is 3962 mm. Use this code when requesting a quote.
- Why check the sheaves before fitting a new belt?
- Worn or misaligned sheaves can damage a new belt quickly. Inspect grooves, alignment and bearings first so the replacement belt runs correctly from the start.
- What should I send to request a quote?
- Send the part number 22 x 3962 Li, the brand Optibelt and the series VB S=C Plus. If you are replacing a set, include the marking from each belt so we can match them.