V-belt Optibelt 22 x 1854 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 1854 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 1854 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm and a 40-degree angle. It is used on industrial drives where a classical V-belt is specified. To confirm fit, match the profile and the length on the belt you are replacing.
Classical V-belts like this one are common on fans, pumps, compressors and other driven equipment. The profile and the length are the two dimensions that matter most when checking a replacement. This belt is profile C, 22 mm across the top, 14 mm high, with a 40-degree angle, and it is 1854 mm long.
The marking on the back of the belt is the quickest way to identify what you have. If it reads 22 x 1854 Li, this is the same size. You can also measure the top width and the outside length of the old belt and compare them with the figures above.
If you are unsure, send a photo of the marking and the drive it runs on. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 1854mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the belt marking for profile C and 22 x 1854 Li. If the old belt is worn or the marking is gone, measure the top width and the length and compare them with 22 mm and 1854 mm.
- What does the 22 x 1854 Li marking mean?
- The 22 is the top width in millimeters and 1854 is the length in millimeters. Li indicates the length is measured on the inside of the belt.
- Can you help if I cannot read the old belt marking?
- Yes. Send a photo of the belt and the drive, or the dimensions you measured, and we will help confirm the right belt or suggest an equivalent.