V-belt Optibelt 22 x 1900 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 1900 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 1900 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a 22 mm top width, 14 mm height and 40 degree angle. Its datum length is 1900 mm. Use these dimensions to match the belt you are replacing.
The most reliable way to identify a replacement is to read the marking on the back of the old belt and compare it with this one. Check the profile letter and the length together, not just one or the other. This belt is profile C, 22 mm across the top, 14 mm high and 1900 mm long. If your old belt carries the same profile and length, it is the correct match.
When no marking is legible, measure the old belt. Confirm the cross-section is about 22 mm at the top and 14 mm high, and that the inside length corresponds to 1900 mm. A belt that is too narrow or too wide will not sit correctly in the pulley groove, and a length mismatch will not allow proper tensioning.
If you are unsure, send the part number 22 x 1900 Li, or the marking from your old belt, by WhatsApp or email. We can confirm the profile and length and help you identify the right belt for the drive.
Dimensions
- Section
- C
- Length
- 1900mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the profile and length marked on your old belt with this one. This belt is profile C, 22 mm top width, 14 mm height and 1900 mm length. Matching both the profile and the length is what ensures a correct fit.
- What if the marking on my old belt is worn off?
- Measure the old belt. Check that the cross-section is about 22 mm wide at the top and 14 mm high, and that the length is 1900 mm. If those dimensions match, this is the correct replacement.
- Can you help me identify the belt if I am not sure?
- Yes. Send the part number 22 x 1900 Li, or any marking from the old belt, by WhatsApp or email. We will confirm the profile and length and help you match it.