V-belt Optibelt 22 x 1829 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 1829 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 1829 Li and any equivalents.
This page covers the Optibelt VB S=C Plus classical V-belt with profile C and a length of 1829 mm. The marking 22 x 1829 Li gives you the top width and the inside length to compare against the belt you are replacing. Use it to confirm the profile and length before you request a quote.
Matching a classical V-belt starts with the belt in hand. Read the marking on the back: a C profile belt should carry a C or the width and length, as this one does with 22 x 1829 Li. Measure the top width across the belt at 22 mm and the height at 14 mm, and check the 40-degree angle. The length to compare is 1829 mm. If the old belt is worn or the marking is gone, take the drive dimensions and the belt cross-section, then send them with the part number you have.
The Optibelt VB S=C Plus is a classical V-belt, not a narrow wedge belt or a cogged belt. It is built for standard industrial drives where a C profile classical belt is specified. When you replace it, inspect the sheaves for wear, alignment and debris, and check the tension on the new belt after the first run-in. If a drive uses multiple belts, replace them as a set so the load stays even across the grooves.
We carry this Optibelt belt and supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. To request a quote, send the part number 22 x 1829 Li, the quantity and any drive details by WhatsApp or email. If you are unsure of the profile or length, send a photo of the marking on the back of the belt and the sheave dimensions, and we will help confirm the right belt.
Dimensions
- Section
- C
- Length
- 1829mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Compare the marking on the back of the old belt. This Optibelt belt is profile C, 22 mm top width, 14 mm height, 40-degree angle and 1829 mm length. If the old marking matches those figures, it is the same size.
- What should I send to request a quote?
- Send the part number 22 x 1829 Li and the quantity you need by WhatsApp or email. If you want us to confirm the profile or length, include a photo of the belt marking and the sheave dimensions.
- Should I replace more than one belt at a time?
- On a drive that uses multiple belts, replace them as a set. Belts wear and stretch together, and mixing a new belt with used ones can cause uneven load across the grooves.