V-belt Optibelt 22 x 1800 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 1800 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 1800 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a C profile, a top width of 22 mm and a height of 14 mm. The belt length is 1800 mm and the angle is 40 degrees. Before you fit it, inspect the drive and sheaves so the new belt seats correctly and runs true.
Check each sheave groove for wear, rust, burrs and embedded debris. Worn or damaged grooves can shorten belt life and cause vibration even when the replacement belt is correct. Confirm the sheave groove angle and width suit a C profile belt, and make sure the sheaves are aligned and the shafts turn freely.
Verify the old belt marking against this belt: profile C, 22 x 1800 Li. If the drive uses more than one belt, replace the full set at the same time so the load is shared evenly. After fitting, check tension and recheck it after the first run-in period.
To request a quote, send the part number 22 x 1800 Li, the quantity and any drive details you have. We carry the Optibelt VB S=C Plus line and can confirm this belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 1800mm
Frequently asked questions
- What profile and length is this Optibelt belt?
- It is a C profile classical V-belt, 22 mm top width, 14 mm height, 1800 mm length, with a 40 degree angle.
- Should I replace all belts on a multi-belt drive?
- Yes. Replacing the full set at the same time helps keep tension and load sharing even across the drive.
- What should I send to request a quote?
- Send the part number 22 x 1800 Li, the quantity you need and any details about the drive or sheaves.