V-belt Optibelt 13 x 1550 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1550 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1550 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile, a top width of 13 mm, a height of 8 mm and a 40-degree angle. It is used on industrial drives where a classical V-belt is specified, such as fans, pumps, compressors and other general machinery. The code 13 x 1550 Li identifies the belt for replacement or new build.
When confirming fit, start with the drive sheave: the A profile and 40-degree angle must match the pulley groove. The top width of 13 mm and height of 8 mm are the section dimensions to check against the groove opening. The length of 1550 mm is the datum length to compare with the old belt or the drive layout.
For a reliable match, read the marking on the back of the old belt and note the profile, width and length. If the marking is worn, measure the top width and the outside length, then compare with the 13 mm width and 1550 mm length listed here. Send the part number 13 x 1550 Li, or the profile and length, for a quote.
Dimensions
- Section
- A
- Length
- 1550mm
Frequently asked questions
- What does the code 13 x 1550 Li mean for this belt?
- The 13 refers to the top width in mm, and 1550 Li is the length in mm. The profile is A, with a height of 8 mm and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Check that the pulley groove matches the A profile and 40-degree angle, and that the top width is 13 mm and the height is 8 mm. Compare the 1550 mm length with the old belt or the drive layout.
- What should I send to request a quote?
- Send the part number 13 x 1550 Li, or the profile A and length 1550 mm, along with the quantity you need. If you have the old belt marking, include that as well.