V-belt Optibelt 13 x 1500 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1500 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1500 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile and a length of 1500 mm. It measures 13 mm across the top, 8 mm in height and has a 40-degree angle. It is the correct reference when you are matching a belt that is already on the drive.
To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and the length. The profile is A, the top width is 13 mm and the length is 1500 mm. If the old belt is worn or the marking is gone, measure the top width and the outside length and send those figures with your request.
The VB S=C Plus belt is a classical V-belt, not a narrow wedge belt, cogged belt or serpentine belt. Use the 13 x 1500 Li reference when ordering, and confirm the height of 8 mm and the 40-degree angle against the pulley groove. A belt that sits too high or too low in the groove will not match the drive.
If you are replacing more than one belt on the same drive, order the same reference for every position so the set matches. Send the part number 13 x 1500 Li by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1500mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and the length. This belt has an A profile, a top width of 13 mm and a length of 1500 mm. Check the marking on the back of the old belt or measure the top width and outside length.
- What should I send to request a quote?
- Send the part number 13 x 1500 Li, or the profile and length from the old belt, by WhatsApp or email. Include the drive details if you are replacing a set.
- Is this a narrow wedge belt or a classical V-belt?
- It is a classical V-belt. The profile is A, the top width is 13 mm, the height is 8 mm and the angle is 40 degrees.