V-belt Optibelt 13 x 1525 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1525 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1525 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile and a length of 1525 mm. It is used on industrial drives where a classical V-belt cross section is required.
To confirm fit, check the drive for the belt cross section and the length marked on the old belt. The profile is A, the top width is 13 mm, the height is 8 mm and the angle is 40 degrees. The length is 1525 mm. Compare these values with the belt you are replacing.
This belt is suited to drives that take a classical V-belt rather than a narrow wedge belt, cogged belt or synchronous belt. Inspect the sheaves for wear, alignment and correct groove profile before installation. If the drive runs multiple belts, replace them as a set so the load is shared evenly.
Send the part number 13 x 1525 Li, or the marking from the back of the old belt, by WhatsApp or email. Our team can confirm the right belt or suggest an equivalent for your drive.
Dimensions
- Section
- A
- Length
- 1525mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt marking for the profile and length. This belt has an A profile, a top width of 13 mm, a height of 8 mm, an angle of 40 degrees and a length of 1525 mm.
- What should I send to request a quote?
- Send the part number 13 x 1525 Li, or the full marking from the back of the belt, by WhatsApp or email. Include the drive details if you have them.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the belts as a set so they share the load evenly and run at the same tension.