V-belt Optibelt 13 x 1600 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1600 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1600 Li and any equivalents.
The Optibelt VB S=C Plus 13 x 1600 Li is a classical V-belt with an A profile, a 13 mm top width, an 8 mm height and a 40-degree angle. The 1600 mm length is the reference for matching the belt you are replacing. Confirm both the profile and the length before you request a quote.
To match this belt to the one being replaced, read the marking on the back of the old belt. Compare the profile letter and the length to the A profile and 1600 mm length of this Optibelt VB S=C Plus belt. The 13 mm top width and 8 mm height are the dimensions to check against the old belt if the marking is worn or missing.
If the old belt is unmarked, measure the top width and the outside length, then compare them with the 13 mm top width and 1600 mm length listed here. The 40-degree angle is part of the profile. When you have the profile and length confirmed, send the part number 13 x 1600 Li by WhatsApp or email for a quote.
A classical V-belt wears with the sheave groove, so inspect the drive while the belt is off. Look for worn or polished groove flanks and check that the sheaves are aligned. If the drive runs more than one belt, replace the set together so the load stays even across the belts.
Dimensions
- Section
- A
- Length
- 1600mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt and compare the profile letter and length to the A profile and 1600 mm length of this Optibelt VB S=C Plus belt. If the marking is not readable, measure the top width and outside length and compare them with the 13 mm top width and 1600 mm length listed here.
- What are the dimensions of this belt?
- This Optibelt VB S=C Plus belt has an A profile, a 13 mm top width, an 8 mm height, a 40-degree angle and a 1600 mm length.
- What should I send to get a quote for this belt?
- Send the part number 13 x 1600 Li by WhatsApp or email. If you are not sure it is the right belt, include the marking from the old belt or the top width and length you measured, and the team can confirm the right belt or suggest an equivalent.