V-belt Optibelt 13 x 1625 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1625 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1625 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with an A profile and a length of 1625 mm. The marking 13 x 1625 Li gives you the top width and the belt length to compare against the belt you are replacing. This page covers how to match it to your drive.
Start with the belt on the machine. Read the marking on the back: profile A, top width 13 mm, height 8 mm, angle 40 degrees, length 1625 mm. The 13 x 1625 Li code on this Optibelt belt carries the same top width and length, so it is the number to match when the old belt is worn or unreadable. If the old belt has a different profile or length, this is not the replacement.
Check the drive before ordering. Look at the pulley grooves for wear, oil or debris, and confirm the belt sits correctly in the groove. A worn pulley can make a new belt run poorly even when the size is right. For drives with more than one belt, replace the full set so the load stays even across the grooves.
Dimensions
- Section
- A
- Length
- 1625mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and length. This belt is profile A, 13 mm top width, 8 mm height, 40 degrees, 1625 mm long. If your old belt carries the same profile and length, it is the match.
- What should I send to request a quote?
- Send the part number 13 x 1625 Li, or the marking from the back of the old belt. If the marking is worn, send the profile and length and we can confirm the belt.
- Can I replace just one belt on a multi-belt drive?
- For drives with multiple belts, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and load across the grooves.