V-belt Optibelt 10 x 800 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 800 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 800 Li and any equivalents.
The Optibelt 10 x 800 Li is a classical V-belt in the VB S=C Plus series with a Z profile and an 800 mm length. Before you fit it, take a few minutes to check the drive and sheaves so the new belt runs true and wears evenly.
Inspect sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and shortens belt life. Check that sheaves are aligned and that the belt will sit at the correct height in the groove. Confirm the sheave profile matches the Z profile and that the 800 mm length suits the drive layout.
Spin the sheaves by hand and check bearings for roughness or play. Look for oil, heat, or belt dust that points to a misalignment or tension problem. Set tension according to your drive requirements, then recheck after the first run-in period. If the old belt failed early, correct the drive before installing the replacement.
For a quote, send the part number 10 x 800 Li, the profile Z, and the length 800 mm by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- Z
- Length
- 800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm alignment and bearing condition. Worn or misaligned sheaves will shorten the life of any new belt.
- How do I identify the belt I need?
- Use the marking on the old belt. This Optibelt belt is marked 10 x 800 Li, with a Z profile and an 800 mm length.
- What information do you need for a quote?
- Send the part number 10 x 800 Li, the profile Z, and the length 800 mm. We will confirm the belt or suggest an equivalent.