V-belt Optibelt 10 x 765 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 765 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 765 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a Z profile and a length of 765 mm. It is used on light-duty industrial drives where a classical cross-section is specified, such as small fans, pumps, and compact machine tools. Confirm fit by matching the profile and the length to the drive before ordering.
The Z profile is the smallest classical V-belt cross-section, so it suits drives with small sheaves and moderate loads. The 10 x 765 Li marking identifies the belt's cross-section and its length. When replacing an existing belt, read the marking on the back of the belt and compare it with the profile and length shown here.
To confirm fit, check the sheave groove for wear and make sure the belt sits correctly in the groove without bottoming out. If the drive uses multiple belts, replace them as a set so the load is shared evenly. A worn or mismatched belt can cause vibration, slipping, and uneven sheave wear.
For a quote, send the part number 10 x 765 Li, the brand Optibelt, and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the sheave dimensions. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- Z
- Length
- 765mm
Frequently asked questions
- How do I confirm this Optibelt Z profile belt fits my drive?
- Check the marking on the old belt and compare the profile and length. This belt is a Z profile with a length of 765 mm. Also inspect the sheave grooves for wear and make sure the belt does not bottom out.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts on the drive as a set. Belts wear at different rates, and mixing old and new belts can cause uneven loading, vibration, and premature failure.
- What information do I need to send for a quote?
- Send the part number 10 x 765 Li, the brand Optibelt, and the quantity required. If you are unsure, include a photo of the belt marking and the sheave dimensions so the team can help confirm the right belt.