V-belt Optibelt 10 x 775 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 775 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 775 Li and any equivalents.
This Optibelt 10 x 775 Li is a classical V-belt from the VB S=C Plus series, with a Z profile and a 775 mm length. It is used on industrial drives where a classical V-belt is specified, such as fans, pumps, compressors and other general machinery. The marking on the belt gives you the profile and length you need to confirm a match.
To confirm fit, compare the existing belt's back marking with the profile and length shown here. The profile is Z and the length is 775 mm; the code 10 x 775 Li also identifies the belt. If the old belt is worn or the marking is unreadable, measure the outside length and top width, then send those values with your equipment details so we can help you confirm the correct belt.
Classical V-belts like this one are common on drives that run at moderate speeds and loads. Check the sheave grooves for wear, oil or debris, and verify that the belt sits correctly in the groove without bottoming out. When replacing a belt on a multi-belt drive, replace all belts in the set at the same time to keep the load evenly distributed.
Dimensions
- Section
- Z
- Length
- 775mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of your existing belt. It should show the profile Z and the length 775 mm, or the code 10 x 775 Li. If the marking is worn, measure the top width and outside length and send those values with your equipment details.
- What does the VB S=C Plus series mean for this belt?
- VB S=C Plus is the Optibelt series name for this classical V-belt. The belt itself is identified by the code 10 x 775 Li, with a Z profile and a 775 mm length.
- Can you help if I am not sure about the profile or length?
- Yes. Send the part number, the marking on the old belt, or your measurements and equipment details by WhatsApp or email. We will help confirm the right belt or suggest an equivalent.