V-belt Optibelt 10 x 730 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 730 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 730 Li and any equivalents.
The Optibelt 10 x 730 Li is a classical V-belt from the VB S=C Plus series, with a Z profile and a 730 mm length. Before fitting it, check the drive and sheaves so the new belt runs true and wears evenly.
Inspect sheave grooves for wear, rust, or embedded debris, and confirm the grooves match the Z profile. Misaligned or worn sheaves can shorten belt life and cause vibration. Verify that the sheave diameters and center distance suit the 730 mm belt length, and that the drive can be adjusted for correct tension.
Check the old belt for cracking, glazing, or missing sections, and note how it sits in the groove. If the drive uses multiple belts, replace them as a set so the load is shared evenly. Clean the grooves and check the bearings and shafts for play before installing the new Optibelt 10 x 730 Li.
For a quote, send the part number 10 x 730 Li, the quantity, and any details from the back of the old belt. We carry the Optibelt VB S=C Plus line and will confirm the Z profile and 730 mm length for your drive.
Dimensions
- Section
- Z
- Length
- 730mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm alignment and that the grooves match the Z profile. Also check bearings and shafts for play, and make sure the drive can be adjusted for tension.
- How do I identify the belt I need?
- Use the marking on the back of the old belt. This belt is marked 10 x 730 Li, with a Z profile and a 730 mm length, and belongs to the Optibelt VB S=C Plus series.
- What information should I send for a quote?
- Send the part number 10 x 730 Li, the quantity you need, and any details from the old belt. You can request a quote by WhatsApp or email, and we will confirm the belt for your drive.